M123 Röchling FLOWMETER (metric)
The M335/M350 flow meter operates on the float principle and is used for flow rate measurements in closed pipelines. The medium flows through the vertically installed flow meter from bottom to top. This raises the float and shows the current flow rate on the scale on the measuring device. The read-off edge corresponds to the largest diameter of the float. The M335/M350 flow meters come as standard with a water scale and a % scale, and two setpoint indicators.
Seal Type - EPDM
EPDM (Ethylene Propylene Diene Monomer) rubber is a synthetic (man-made) elastomer (rubber) with high technical properties which is capable of making and maintaining a strong, long term seal.
The main properties of EPDM are its outstanding heat, ozone, and weather resistance. It is suitable for use against various temperature and pressure combinations coupled with strong Ozone and UV stability and resistance to degradation.
EPDM is compatible with, hot and cold water, both fresh and saline and alkalis.
It has excellent electrical insulating properties and good resistance to ketones, ordinary diluted acids, and alkalis. Its resistance to polar substances and steam is also good. It is not suitable as a seal against most oils, hydrocarbons, halogenated solvents, and concentrated acids.
Typical operating temperatures
-45°C to +120°C
| SKU | Size | Quantity | Add to Cart |
|---|---|---|---|
| M123016A | 1.5-15 LPH 16mm | ||
| M123016B | 2.5-25 LPH 16mm | ||
| M123016C | 5-50 LPH 16mm | ||
| M123016D | 10-100 LPH 16mm | ||
| M123020A | 8-80 LPH 20mm | ||
| M123020B | 15-150 LPH 20mm | ||
| M123020C | 20-200 LPH 20mm | ||
| M123032A | 15-150 LPH 32mm | ||
| M123032B | 30-300 LPH 32mm | ||
| M123032C | 50-500 LPH 32mm | ||
| M123032D | 100-1000 LPH 32mm |
